Owner's Manual

www.polarispool.com
Install Eyeball Regulators
If the Universal Wall Fitting and Eyeball Regulators are successfully installed, SKIP to
Step 2. Otherwise, see Installing Other Pool Connections.
Installing Other Pool Connections
If the pool does not have a dedicated return line, the Polaris 360 connects to most common return lines using
special adapter kits available for purchase at a participating Polaris dealer.
For pools with plastic-pipe return lines (without pipe threads) that are cut off flush with the pool wall:
If pipe is 1” in diameter, use
1” Stub Pipe Connection Kit
(part #9-100-8002)
If pipe is 1-1/2” in diameter, use 1-1/2” Stub Pipe Connection Kit
(part #9-100-8003).
For directional eyeball fittings that do not have a 1-1/2” threaded socket, request the Eyeball Adapter
Connection Kit (part #9-100-8005).
These are the most common, but not all of the possible pool connections.
If the UWF and Eyeball Regulators still cannot be installed on the pool, contact your dealer or Customer Service
to determine which parts may be necessary.
Other Connections Requiring Special Fittings
If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition to one of the kits
listed above. Contact your dealer or Customer Service to determine which parts may be necessary.
1" Return Line
1" Expansion
Connector
1-1/2"
Expansion
Connector
1-1/2" Return Line
Does current fitting
look like this?
Connector
Head
Retainer
Ring
Wall Fitting
Adapter
1-1/4" Return Line
1-1/4" Sleeve
Not included with kit
If pipe is 1-1/4” in diameter, order 1” Stub Pipe
Connection Kit (part #9-100-8002) and 1-1/4”
Sleeve Kit (part #8-841-00).
English