2006 ATV Owner's Manual

155
ADJUSTMENTS
Front Suspension
Suspension Set -Up
6. Place the transmission in neutral and slowly roll the machine forward and rearward at
least t en feet (3 m) without lifting or pushing down on the suspension.
7. Turn the handlebars fully to the left and right.
8. With the rider still on the vehicle, repeat the measurement performed in step 4.
9. Subtract the step 8 measurement from the step 4 measurement. The difference should
be between 3.75 and 4 inches (9.5-10.2 cm).
10. If the number is less than 3.75 inches (9.5 cm), decrease the front spring prel oad (see
page 157) and repeat all steps. If the number is higher than 4 inches (10.2 cm), incr ease
spring preload and repeat all steps.