Industries Offroad Vehicle User Manual

DAILY PRE-RIDE INSPECTION

Inspect your ATV each time before riding to ensure it is in proper working or-

der. If proper inspection is not done, severe injury or death could result.

WARNING

If a proper inspection is not performed serious injury or death can result.

Always inspect y our ATV before riding following the checklist carefully.

Before riding your vehicle, inspect all operating controls and parts.

Item/Inspection Procedure

1. Tires - check condition and pressures

2. Fuel and oil tanks - fill both tanks to their proper levels

3. All brakes - check operation, adjustment and fluid level (includes

auxiliary brake)

4. Throttle - check for free operation and closing

5. Headlight/Taillight/Brakelight - check operation of all indicator lights

and switches

6. Engine stop switch - c heck for proper function

7. Wheels - check for tightness of wheel nuts and axle nuts; check that

axle nuts are secured by cotter pins

8. Drive chain - condition and slack; refer to drive chain adjustment

9. Air cleaner element - check for dirt; clean or replace

10. Steering - check for free operation noting any unusual looseness in

any area

11. Loose parts - visually inspect vehicle forany damaged or loose nuts/

bolts or fasteners

12. Operators helmet, goggles and clothing

13. Engine coolant - (Liquid Cooled Models Only) check for proper level

at the recovery bottle