Owner's manual

Instruments, Features and Controls

Instrument Cluster

Multi-Function Display (MFD)

Diagnostic Functionality

Certain conditions will cause an error message to display in the screen. If this occurs, please see your authorized dealer.

Engine Error Codes

The error screen displays only when the CHECK ENGINE light is on or when it

goes on and off during one ignition cycle. Error codes display only during the

current ignition cycle. When the ignition switch is turned OFF, the code and

message is lost, but will reappear if the fault reoccurs after restarting the

engine.

If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes

from the display.

1. If the error codes are not displayed, use the MODE button to toggle until

“Ck ENG” displays on the main line of the display.

2. Press and hold the MODE button to enter the diagnostics code menu.

3. Record the three numbers displayed in the gear position, clock and

odometer displays.

4. See an authorized dealer for code details and diagnosis.

Message Location Indicates

LO DC Voltage Screen Voltage remains below 11.0 volts for more than 10 seconds

OV DC Voltage Screen Voltage remains above 15.0 volts for more than 10 seconds

ERROR All Checksum error (gauge malfunction)

Suspect Parameter

Number (SPN)

Error Code

Number (0-9)

Failure Mode Indicator (FMI)