Owner's manual

SUSPENSION SETTINGS (EPS)
FRONT/REAR SPRING PRELOAD (EPS)
The front and rear suspensions are preload adjustable, with five possible
settings. The suspensions are set on the lowest setting at the factory. The
factory setting is appropriate for nearly all riding conditions.
If desired, the suspension may be adjusted to maintain vehicle clearance height
when carrying loads. Always heed the following rules if you make adjustments to
this suspension.
• Always return the suspension to the lowest setting after the load is removed
from the vehicle. The increased suspension height will negatively impact
vehicle stability when operating without a load.
• Always apply the same adjustment setting to all four wheels.
Adjust the front and rear shock springs by rotating the adjustment cam either
clockwise or counter-clockwise to increase or decrease spring tension.
110
MAINTENANCE