Owner's manual

EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
DECLARATION OF CONFORMITY
Polaris Sales Europe Sàrl
Route de l’Etraz
Business Center A5
1180 Rolle, Switzerland
Telephone [phone]
DECLARATION OF CONFORMITY
September 18, 2017
Polaris Sales Europe Sàrl declares that the vehicle(s) listed
below conform to the essential requirements to all terrain
vehicles.
APPLICABLE EUROPEAN
DIRECTIVES
TEST / EVALUATION METHODS:
2006/42/EC as amended
(Machinery Directive)
EN ISO 12100:2010 Hazard Analysis
EN 15997:2011/AC:2012 Driver
Perceived Noise Level & Vibration
2014/30/EU as amended
(EMC Directive)
UNECE R10
MODEL COMMERCIAL NAME VEHICLE SERIAL
NUMBER
R _ _ RG _ 99 _ _
(All combinations)
General 1000 EU
General 1000
Zugmaschine
(See Product
Identification Label)
9
INTRODUCTION