Installation Manual

ManualsBrandsPolaris ManualsAutomatic Pool CleanersPolaris Vac-Sweep 380 Pressure Side Pool Cleaner

1

4. Hold the water management system in place

and snap in the new jet retainers.

5. Place the new base weight on the rear jet

r

etainer with the weight flush against the

vacuum tube.

V

ac Tube

Base Weight

Rear Jet Retainer

F

eed Pipe/Timer

B

lank Assembly

6. Reinstall the frame onto the base of the

cleaner and reinstall the four screws, leaving

t

hem loose.

7

. Place the o-ring onto the new feed

pipe/timer blank assembly.

8. Install the new feed pipe/timer blank

assembly.

9. Tighten the four screws into the frame.

10. Reassemble the cleaner.

©2006 Polaris Pools Systems, Inc. All Rights Reserved. TL-862 6/06