Owner's manual

36
THE PERFECT FIT
Front Suspension Adjustments
Shock Valving (Walker/Evans Shocks)
These shocks can be revalved if spring preload alone isn't sufficient and
further adjustment is desired to control suspension stiffness.
WARNING! Changing shock valving requires special tools and a sound
knowledge of mechanical theory, tool use, and shop procedures to perform the
work safely and correctly. Shocks contain high-pressure nitrogen gas. Use
extreme caution when handling high-pressure service equipment. We
recommend that this work be performed by a POLARIS dealer.
Compression Damping
High Compression Damping
Force Adjustment
Increase the high compression
damping force by turning the
adjuster clockwise to increase the
stiffness.
Decrease the high compression
damping force by turning the
adjuster counter-clockwise to
increase the softness.
The maximum adjustment for this
adjuster is the fully turned in
position. The minimum adjustment
is 22 clicks out from the maximum
position.
CAUTION! Do not turn the adjuster past the minimum or maximum adjustment.
The adjuster may be damaged.
Standard Position
High speed adjuster 14 clicks out from fully turned in position
Adjuster
Stiffer
Softer