User's Manual

FEATURES AND CONTRO LS

Light Switches

The light switch is l ocated on the left

handlebar (1). It’s used to turn the

lights on and off and to switch the

lights from high beam to low beam.

NOTE: The lights won’t work unless

the key is in the ON position and the

shut-off switch is in the RUN position.

Indicator Lights

With the engine running, verify the function of all indicator lights each

time the ATV is used.

NOTE: The taillight is on whenever the main switch (key) is on.

Turn the key off to prevent battery drain.

1. Transmission Neutral Indicator

2. Transmission Reverse Indicator

3. HighTempWarning(displays i f engine overheats)

Operating the ATV on streets or roads, especially in darkness,

could result in an accident and serious injury or death.

Your ATV is not equipped with highway-approved lights. It’s

designed for and must be used for off-road use only.Use

caution and drive at reduced speeds in conditions of reduced

visibility such as fog, rain and darkness.

WARNING