Owner's Manual

ADULT SECTION

Maintenance

Track Adjustment

If the track needs adjustment:

1. Loosen rear idler shaft bolt (D).

2. Tighten or loosen the track adjusting screws (E) as necessary to

provide equal adjustment on both sides of the track.

3. Repeat measurem ent on the other side of the track.

NOTE: Check more frequently when the machine is new.

4. Start machine and slowly rotate the t rack at least five revolutions,

let the track stop rotating by itself (do not apply brakes).

5. Check track alignment (side to side) by comparing the distance

from t he drive lug to the Hi-fax on both sides. Readjust until

centered.

6. Tighten idler shaft bolt.

7. Readjust the t oe block to proper spacing and tighten.