Installation Guide

Installation Instructions
Vessel sinks are designed to be mounted on, or recessed into, the countertop. They are available in porcelain, glass,
stone, bronze, copper, bamboo, and stainless steel. When mounted above the counter, and having a rounded bottom, a
sink ring is typically installed below the basin in order to stabilize it.
• Measure and cut a hole in the countertop
matching the diameter of the drain pipe.
• If the bowl has a curved bottom it will require a sink
ring. Position the ring on the counter over the drain
hole, then rest the basin on the ring.
• If the bowl has a at bottom it can be rested directly
on the counter without a sink ring.
• Install the drain.
Vessel Sinks
The Installation of Any Vessel-Style Sink
The Steps
Polaris Sinks © 2015
www.polarissinks.com
[e-mail]
ABOVE COUNTER RECESSED
INTO COUNTER
Above Counter Installation Recessed Installation
• Measure and cut a hole in the countertop to the
diameter necessary to hold the sink at the desired
depth. The recess should not exceed half of the
bowl’s height. The hole should be cut on a bevel to
match the bowl’s angle.
• Rest the basin in the hole.
• Install the drain.