Specifications
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing.
Effective Date: November 2014 Void After: November 2015
Product: Plumbing Fixtures (Stainless Steel) File No. 5436
Issued To: Polaris Sinks
Identification: Each fixture shall be permanently and legibly marked with the manufacturer's
name or trademark. The product shall also bear the cUPC® certification mark.
Markings shall be applied so as to be visible after installation.
Characteristics: Stainless steel plumbing fixtures may include kitchen sinks, bar sinks, and
lavatories. To be installed in accordance with the manufacturer's
instructions and the requirements of the latest edition of the Uniform
Plumbing Code.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
International Plumbing Code (IPC®)
Products are in compliance with the following standard(s):