User's Guide

ERROR MESSAGES
If an error occurs while updating your software or map, perform one or all of the
following measures to resolve the issue:
1. Ensure you are using a Tier 1 USB flash drive. For more information on USB
requirements, see page 50.
2. Remove and reconnect the USB flash drive securely.
3. Ensure display files are not inside a folder on the flash drive.
4. Only Polaris display files should be on the flash drive while performing
updates. Remove other files, if necessary.
5. Format the USB drive on your personal computer using FAT32 or exFAT
formatting systems.
6. Try a different USB flash drive.
USB HARDWARE
SOFTWARE UPDATES
For software update, POLARIS recommends using a SanDisk®, Kinston®, or
similar USB flash drive with a minimum of 4GB in available memory, formatted
using the FAT32 or exFAT file systems. For best results remove all files from the
flash drive before starting the update process.
MAP UPDATES
For Map updates, a 32GB USB drive is required (USB 3.0 drive is highly
recommended) USB drive must be formatted to exFAT before copying the map
file onto it.
TRAIL UPDATES
For Trail updates, a 4GB drive formatted to FAT32 can be used.
50
MAINTENANCE