User's Guide

The Ride Command display is compatible with Android® and iOS®. Go to
https://ridecommand.polaris.com/en-us/supported-devices for latest operating
system compatibility.
NOTICE
There is no built-in microphone in the display. Phone call audio will play
through the phone speakers or a Polaris approved headset if connected. Some
dial options may be unavailable at speeds greater than 3 mph (5 km/h).
AUDIO SCREEN
NOTICE
Your snowmobile is not equipped with a speaker system. Audio can only be
transmitted through a Bluetooth® media device or headset. Only one device
and one headset can be connected at a time.
Audio playback through
USB or Bluetooth®
devices are compatible
with your Ride Command
display. The Music Screen
allows you to access music
stored on your smartphone
or other music device. You
can pair your device using
Bluetooth®, or by
connecting it to the
display’s USB port.
DEVICE REQUIREMENTS
Audio playback is only available on USB flash drives formatted to ex-FAT or
FAT32 and operating systems iOS® 10 and Android® 5.0 or newer.
MAP SCREEN
Press the Map button from
the App Tray in the Badge
Panel or press the Back
button to cycle to the map
screen. The map will
center you based on the
location of the in-vehicle
GPS.
33
OPERATION