User's Guide

ANDROID® PAIRING
To connect your smartphone to the display, do the following:
ON YOUR SMARTPHONE
• In your smartphone settings, turn on Bluetooth®.
NOTICE
On some phones you have to make the phone visible to other devices. If your
phone has this feature, it should show up on the Bluetooth® connection screen
of your phone. If no option exists to make your phone visible to the display, it is
already visible to the display.
• If available, make your phone discoverable to other devices in your
Bluetooth® settings.
ON THE RIDE COMMAND DISPLAY
• Go the Settings menu by pressing the Badge Panel button followed by the All
Settings button.
• Select General from the left toolbar and click on Bluetooth Devices.
• Press the Add Device button.
• When your phone appears on the display, press the + button next to it to pair
with your phone.
• Ensure the confirmation code on the screen and your phone are the same
then press Pair on your phone.
ON YOUR SMARTPHONE
• A request will appear to pair with the display. Ensure the confirmation code
matches between the Ride Command display and your phone.
• Press OK.
• For an optimal experience enable notifications and sync contacts from your
smartphone’s Bluetooth® settings.
ON THE RIDE COMMAND DISPLAY
• The display will now show a list of previously connected phones on the
display. If it is unpaired, click on your phone from the list.
• Once the display says connected/paired, your phone is now connected to the
display via Bluetooth®. After a phone is connected, the Device Manager
Screen will appear.
30
OPERATION