User's Guide

NOTICE
To change the temperature units from Fahrenheit or Celsius, open the All
Settings menu from the Badge Panel and navigate to the General tab.
FUEL SETTING
Change the fuel type in the Badge Panel by opening the Controls tab and
pressing the Fuel Type button.
You can also navigate to the fuel type selection from the Vehicle Info category by
pressing the All Settings button. See page for more information.
There are two fuel options available. Choose the fuel description that best fits
the fuel type in your vehicle’s tank.
• 91+ E0 Fuel = 91 PREMIUM MODE
• ANY E10 OR UNSURE Fuel = 87 ETHANOL MODE
NOTICE
Poor fuel quality or a low fuel level may cause engine detonation. When engine
detonation is detected, the fuel type may automatically switch to ethanol mode
to protect the engine. When this occurs, fuel type selection cannot be switched
back to premium. Please shutdown the snowmobile, verify that the vehicle has
plenty of fuel, and restart the engine to allow fuel type selection option to
resume.”
For specific fuel recommendations for your vehicle, reference your Owner’s
Manual.
LOCK VEHICLE BUTTON
If your vehicle is equipped with a pin activated security system (P.A.S.S.), the
Lock Vehicle button will appear on the Badge Panel. Press this button to lock
the vehicle before powering off the engine. To unlock your vehicle, you will be
prompted to enter a preset passcode. To set up P.A.S.S., see page 27.
NOTICE
The P.A.S.S. feature must be activated by your dealer using Polaris Digital
Wrench. See dealer for setup and activation.
NOTIFICATIONS TAB
Press the Notifications tab to view DTC codes, installed software, and vehicle
warnings.
22
FEATURES AND CONTROLS