User Manual

5
1. Remove the 2 screws underneath the air
condioning panel
2. Pull the trim o starng at the BOTTOM. Pull
gently as you will need to disconnect the plugs
from the back of the air condioning panel
3. Remove all plugs from the back of the air
condioning control panel, remove trim
and set aside
4. Remove 8 screws to access the back of the
monitor and head unit
5. On the back of the OEM monitor, remove linking
cable (may look dierent in newer models, please see
PAGE 6)
6. Keep this cable in case you ever want to revert
back to factory standard.