Manual

ROLLSEAL, INC • 1751 Co Rd 68 • Bremen, AL 35033 • Phone [phone] • Fax [phone]
Manual No. 4801-5312 Rev 7-10 Page 3 of 4
13. Connect pump power cord to terminals of
electrical box as shown in wiring
Diagrams. See Figures 7 or 8.
14. Close electrical box and securely tighten
lid of electrical box.
15. Bundle pump power cord with other
cords using ribbon ties.
16. Reconnect power and water.
17. Test new pump for proper operation.
18. Replace cool pads.
19. Installation complete.
Black
White
Ground
Single Speed
Harness
TO MOTOR
PUMP
AC
POWER
Fan
Switch
White*
Black*
Black
White
Ground
Pump
Switch
Ground
Cordset
Figure 7
Single Speed Wiring Diagram
Black
*
White*
Ground
To
Motor
2 Green
3 Red 4 Orange
6 Black
5 Orange
1 Blue
Pump
To
Switches
Ground
Black
White
AC
Power
Cordset
Figure 8
Variable Speed Wiring Diagram
Ground
* : When wiring Little Giant Pumps, (part # 6422-0612, 6422-0614, and 6642-0615) the
Black and White wires are Blue and Tan, respectively. Compare with ‘Kits’ list on page 1.
* : When wiring Little Giant Pumps, (part # 6422-0612, 6422-0614, and 6642-0615) the
Black and White wires are Blue and Tan, respectively. Compare with ‘Kits’ list on page 1.