Operation Manual

Cadence Sensor Pairing
Your new cadence sensor must be paired with
the receiving device in order to receive cadence
data. For more information, see the user
guidance material of the receiving device or
mobile application.
To ensure a good connection between your
cadence sensor and the receiving device, it is
recommended to keep the device in a bike
mount on the handlebar.
Care and Maintenance
Keep the sensor clean. Clean it with a mild soap and
water solution, and rinse off with clean water. Dry it
carefully with a soft towel. Never use alcohol or any
abrasive material, such as steel wool or cleaning
chemicals. Do not immerse the sensor in water.
Your safety is important to us. Make sure the sensor
does not disturb pedaling or using the brakes or gears.
While riding your bike, keep your eyes on the road to
prevent possible accidents and injury. Avoid hard hits
as these may damage the sensor.
Replacement magnet sets can be purchased separately.
ENGLISH 5