User Guide

Batteries
All WearLink transmitters have user changeable
batteries. To change the battery yourself, follow
the instructions below and see picture C on the
front cover.
1. Using a coin, open the battery cover by
turning it counterclockwise to OPEN.
2. Insert the battery inside the cover with the
positive (+) side against the cover. Make
sure the sealing ring is in the groove to
ensure water resistance.
3. Press the cover back into the connector.
4. Use the coin to turn the cover clockwise to
CLOSE.
Open the battery cover only when changing the
battery to ensure a long life. Make sure the
sealing ring is not damaged, in which case you
should replace it with a new one.
Battery kits with sealing rings are available at
Polar retailers and authorized Polar Service
Centers. In the USA and Canada, additional
sealing rings are available at authorized Polar
Service Centers. In the USA the sealing
ring/battery kits are also available at
www.shoppolar.com.
Keep batteries away from children. If
swallowed, contact a doctor immediately.
Batteries should be disposed of in compliance
with local regulations.
ENGLISH
4