Operation Manual

4. Tie the strap around your chest, just below
the chest muscles, and attach the hook to
the other end of the strap. Picture B3.
5. Check that the moist electrode areas are
firmly against your skin and that the Polar
logo of the connector is in a central and
upright position. Picture B4.
Detach the connector from the strap and rinse
the strap under running water after every use.
See detailed washing instructions in the Caring
for Your Heart Rate Sensor section.
Linking the Heart Rate Sensor with Nike +
iPod
Nike + iPod -compatible heart rate sensors are
sold separately from the Nike + iPod Sport Kit
and the Nike + iPod sensor. Nike + iPod
compatible heart rate sensors can be used with
iPod nano (5th generation or newer).
Before using the heart rate sensor for the first
time, you must link it to your iPod nano
receiver:
• iPod nano (5th generation or newer):
Connect your Nike + iPod receiver to your
iPod nano, choose Nike + iPod > Settings >
Heart Rate Monitor > Link, and follow the
on-screen instructions.
Unlinking the heart rate sensor:
• iPod nano: Choose Nike + iPod > Settings >
Heart Rate Monitor > Unlink, and follow the
on-screen instructions.
Linking the Heart Rate Sensor with Nike+
SportBand
Nike+ SportBand -compatible heart rate sensors
are sold separately from the Nike SportBand.
Before using the heart rate sensor for the first
time, you must link it to your Nike+ SportBand:
2 ENGLISH