Operation Manual
E 60 E 61
Interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
To be able to transfer the recorded training information via IR
communication and to analyse it with Polar Precision Performance
software version 3.0 or later, you need the Polar IR Interface, unless
there is an IR data port and Windows
®
95 operating system on your
computer.
Uploading Settings from Computer
Your Polar S610 offers you the option of preparing your settings with Polar
Precision Performance software. You are also able to set following
functions with the software:
• a user ID, user name or logo for easier receiver recognition in
multi-user situations
• the heart touch function to show the current heart rate limits, store a
lap time or swap the display options during your exercise
• names and alarm times for 7 reminders
• options lock function on or off
You may upload settings from a computer to a wrist receiver either via IR
communication or via audible Polar Uplink. For IR communication please
see the previous chapter and for the Polar Uplink communication proceed
as follows:
E. CONNECTION TO
COMPUTER
There is two-way communication
between Polar S610 and a computer. Polar
Precision Performance software offers an easy way
to analyse training data. A training log makes it
possible to plan future training. Wrist receiver
settings are easy to upload from the software
instead of entering them manually.
1. Start the software.
2. Connect the Polar IR Interface to the serial port (RS-232) of your
computer.
3. In the Time of day display scroll up or down until CONNECT is displayed.
4. Point the infrared window of the receiver towards the infrared window
of the interface. The maximum infrared transfer distance is 20 cm/ 8" and
the infrared transfer angle ±15 degrees.
5. Activate the heart rate monitor connection function of the software.
Your receiver should now communicate with the software. The receiver
automatically returns to the Time of day display after data transfer.
Downloading Training Data to a Computer
S610 manual/GBR B.pm6 18.12.2000, 15:5360-61