Operation Manual

B 25B 24
Setting timers
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired timer is displayed. Press OK to start
setting the timer.
7. Scroll up or down to turn the timer on or off. Press OK.
Timer OFF: skip steps 8-9.
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK.
Setting heart rate limits
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press OK to enter the limits loop.
8. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
9. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Turning heart rate limits on/off
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until Limits is displayed.
7. Press and hold the signal/light button to turn limits on or off. Release.
You can also turn the limits off in the Lim Low loop by scrolling the
down button.
Setting interval type
You can select 3 optional types of intervals:
A. Timer-based interval Ends your interval when you have
used the selected time.
B. Heart-rate-based interval Ends your interval as you reach the
selected heart rate.
When selecting heart-rate-based
interval, recovery calculation must be
set on.
C. Manual interval End the interval training session
by pressing OK.
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until Interval TIMER/ Hr/ MANUAL is displayed. Press
OK to start setting the interval type. TIMER/ Hr/ MANUAL is flashing.
7. Scroll up or down to select the interval type that will be used to end the
interval. Press OK.
A. Timer-based interval Or
8. Scroll up or down to adjust
minutes. Press OK.
9. Scroll up or down to adjust
seconds. Press OK.
Interval TIMER appears.
B. Heart-rate-based interval
8. Scroll up or down to adjust the
heart rate that will end your
interval. Press OK.
Interval Hr appears.
S610 manual/GBR B.pm6 18.12.2000, 15:5224-25