User's Manual

10. USING A NEW HEART RATE SENSOR
Using a New Heart Rate Sensor
If you purchase a new compatible heart rate sensor as an accessory, it has to be introduced to the training
computer. This is called pairing and takes only a few seconds. Pairing ensures that your training computer
receives signals from your accessory only, and enables disturbance-free training in a group.
Please note that WearLink W.I.N.D. heart rate sensor does not measure heart rate in water.
Pairing a New Heart Rate Sensor With Training Computer
Wear the heart rate sensor and make sure that you are not near (40 m/131 ft) other heart rate sensors.
1. Go to Menu > Settings > Sport profiles > Sport > Heart rate transmitter > Search new and press OK.
2. The training computer starts searching for the sensor signal, Searching for new heart rate transmitter
is displayed.
3. Once the new sensor is identified, Heart rate transmitter is found is displayed. Pairing is complete.
4. If the search is not successful, Heart rate transmitter not found or Other heart rate transmitters
interfering. Move further. , Try again? YES / NO is displayed.
5. Select YES to start the search again.
6. Select NO to cancel the searching.
7. To return to time mode, press and hold the BACK button.
ENGLISH
Using a New Heart Rate Sensor 41