Getting Started Guide

Technical Specifications
Polar Move Heart Rate Monitor
Battery type
CR1632
Battery life Average 6 months (training 6 h/day,
5 days/week)
Operating temperature -10 °C to +50 °C / 14 °F to 122 °F
Back cover Polyamide
Wrist strap Polyurethane
Wrist strap buckle Stainless steel complying with the
EU Directive 94/27/EU and
amendment 1999/C 205/05 on the
release of nickel from products
intended to come into direct and
prolonged contact with the skin.
Watch accuracy Better than ± 0.5 seconds/day at 25
°C / 77 °F temperature.
Accuracy of heart rate
measurement
± 1% or ± 1 bpm, whichever larger,
definition applies to steady state
conditions.
Water resistance 30 m (Suitable for bathing and
swimming)
Polar H1 Heart Rate Sensor
Battery type
CR 2025
Battery life 1500 hours of use
Battery sealing ring O-ring 20.0 x 0.90 Material Silicone
Operating temperature -10 °C to +50 °C / 14 °F to 122 °F
Connector material Polyamide
Strap material 38% Polyamide, 29% Polyurethane,
20% Elastane, 13% Polyester
Water resistance 30 m (Suitable for bathing and
swimming)
The materials of Polar Move have been chosen and
tested to comply with relevant standards and
authority requirements, including CPSIA (Consumer
Product Safety Information Act/Children's Product).
This product is compliant with Directives
93/42/EEC and 1999/5/EC and 2011/65/EU. The
relevant Declaration of Conformity is available at
www.polar.com/en/regulatory_information.
Regulatory information is available at
www.polar.com/en/regulatory_information.
This marking shows that the product is protected
against electric shocks.
14 Important Information