User Guide

26
8. If you have recorded laps in the course of the
exercise, you can begin recalling them by pressing
the red button. The top line will show the split
time and the middle line will show the lap time.
The lower line will show alternating heart rate
information. The average heart rate for the lap
will be identified by a small “avg”. When this
notation disappears, the heart rate at the end of
the lap will be displayed. Finally, in the lower right
hand corner the number of the lap can be seen.
9. Each time the upper right button is pushed the
next lap will be displayed.
10. To get out of the Laps recall, press the blue button
one time. "Laps" will be displayed again and you
will be back at step 7.
11. Press the upper right button one time and the
total exercise time (“Exe.Time”) will be displayed.
12. Press the upper right button one time and the
target zone limits for that exercise will be displayed.
If you have set target zone limits to off, the screen
will display "OFF".
13. Press the upper right button one time. The number
of recorded heart rate samples will be displayed.
14. You can begin recalling the samples by pressing
the red button. The middle line will show the time
when the sample was recorded. The bottom line
will show the heart rate. Press the upper right
button to advance through the samples.
15. Press the blue button to exit the samples recall.
16. If you press the upper right button again, you can view all the
information in the File mode once more.
17. Press and hold the blue button to return to the Time of Day.
Note: You can reverse through the order of screens by pressing
the lower right button.