User Guide

23
Activating the Recovery Calculation
The recovery calculation can only be activated during
the Exercise Pause mode.
7. To begin the recovery calculation, press
and hold the red button until you hear a
long beep and the upper line of the
display reads, “RecoTime”. Notice that the
middle line will show a timer counting
down to zero. You can program the
amount of time in the Options mode.
When this time is up, the lower line will
momentarily show how many beats the
student recovered, then it will switch back
to his or her current heart rate. If there is
not time to record the number of heart
beats dropped, this information is stored
and can be accessed in the File mode.
Restarting or Stopping the Recording
8. You can restart the recording with a quick push of the red
button, or you can end the recording entirely by pressing the
blue button. This will take you to the Time of Day.