Operation Manual

Using the case
After adding the activity monitors to
polargofit.com (see Setting Up Polargofit.com),
tag the cases accordingly. For instruction pictures,
see page 8 of this user manual.
1. Select the number strips and case
identification pads which correspond to the
monitor IDs of the first case.
2. Remove the adhesive cover from the back of
the number strips, and attach the strips on the
grooves on the case (see picture 1). Make sure
the number strips are attached in such a way
that the numbers are in an upright position
when the case is hung on the wall.
3. Insert the case identification pad to the case's
pocket (see picture 1).
4. Tag the remaining cases in the same way.
Placing the monitor in the case:
1. Fold the activity monitor as shown in picture 2.
2. Place the folded activity monitor into the slot so
that the monitor display can be easily read.
The easiest way to pick up the activity monitor
from the slot is shown in picture 3.
After the activity monitors are assigned to the
students for the activity measurement period, the
top row of the activity monitor's display shows
either the monitor ID or the assigned student's
polargofit.com username. It is easy for the student
to locate their activity monitor from the case.
You can print out a student list for the course in
the polargofit.com web service and place the list
into the case's pocket on the top flap.
Hanging on the wall:
The case can be hung on the wall by the carrying
strap.
ENGLISH
8 Activity Monitor Management System