Operation Manual

26 27
SETTING THE RECORDING INTERVAL
Start from Recalling the recorded information .
LEFT and FILES scan in the display.
INT flashes in the display.
1. Press SIGNAL/LIGHT to set the recording interval.
CHOOSE FROM THESE ALTERNATIVES:
INT 5 Heart rate is recorded every 5 seconds.
Full memory 5h 34min.
INT 15 Heart rate is recorded every 15 seconds.
Full memory 16h 42min.
INT 60 Heart rate is recorded every 60 seconds.
Full memory 66h 49min.
LAP - - Average and current heart rates of the lap are recorded by
pressing STORE/LAP/RECOVERY. Ful memory 360 laps.
Besides each alternative you can see the amount of memory left
when using that particular recording interval. The selected
recording interval defaults for the next measurement.
The recording interval - - is practical for example in exercising
sessions where recording of heart rate information is required just
occasionally or not at all. This function uses the memory
economically and enables you to record more exercises.
You have the following three alternatives to continue:
1. To continue recalling the training information, press
STORE/LAP/RECOVERY.
The cover page of the last recorded file appears in the
display.
Continue from Recalling the training information.
2. To delete the most recent file...
Continue from Deleting the most recent file.
3. To return to Time of day display, press SELECT twice.
RECALLING THE
RECORDED INFORMATION
CHOOSE FROM THESE ALTERNATIVES TO START ANALYZING:
From the Time of day display:
1. Press SELECT twice to enter the FILE mode.
LEFT and FILES scan in the display.
INT flashes in the display.
From heart rate measurement:
1. Stop the stopwatch by pressing the SET/START/STOP.
2. Press SELECT once to enter the FILE mode.
LEFT and FILES scan in the display.
INT flashes in the display.
LEFT
Indicates the amount
of memory left with
the selected
recording interval.
FILES
Indicates the amount of files
in the memory. Each training
session is recorded as one file.
INT
Indicates the selected
recording interval.