USER MANUAL
CONTENTS Contents Introduction Get started Product elements Installing the cadence sensor Cadence sensor pairing Important information Care and maintenance Cadence sensor battery Frequently asked questions Technical specification 2 3 4 4 5 7 8 8 8 8 9 2
INTRODUCTION Polar Cadence Sensor is designed to measure cadence, i.e. crank revolutions per minute, when cycling. The sensor is compatible with Bluetooth® Smart Ready devices that support Bluetooth® Cycling Speed and Cadence Service. You can use your cadence sensor with dozens of leading fitness apps as well as with Polar products using Bluetooth® Smart. Check the compatible products and devices at support.polar.com.
GET STARTED PRODUCT ELEMENTS l Cadence sensor (A) l Cadence magnet (B) 4
INSTALLING THE CADENCE SENSOR To install the cadence sensor and cadence magnet, you need cutters. 1. Check the chain stay for a suitable place for the cadence sensor (picture 1 A ). Do not install the sensor on the same side as the chain. The Polar logo on the sensor should be facing away from the crank (picture 2). 2. Attach the rubber part to the sensor (picture 3). 3. Clean and dry a suitable place for the sensor and place the sensor on the chain stay (picture 2 A).
CADENCE SENSOR PAIRING Your new cadence sensor must be paired with the receiving device in order to receive cadence data. For more information, see the user guidance material of the receiving device or mobile application. To ensure a good connection between your cadence sensor and the receiving device, it is recommended to keep the device in a bike mount on the handlebar.
IMPORTANT INFORMATION CARE AND MAINTENANCE Keep the sensor clean. Clean it with a mild soap and water solution, and rinse off with clean water. Dry it carefully with a soft towel. Never use alcohol or any abrasive material, such as steel wool or cleaning chemicals. Do not immerse the sensor in water. Your safety is important to us. Make sure the sensor does not disturb pedaling or using the brakes or gears. While riding your bike, keep your eyes on the road to prevent possible accidents and injury.
l When you begin cycling, a flashing red light indicates that the sensor is alive and it is transmitting cadence signal. As you continue cycling, the light goes off. TECHNICAL SPECIFICATION Operating temperature: -10 °C to +50 °C / 14 °F to 122 °F Battery life: Average 1400 hours of use. Accuracy: ±1 % Material: Thermoplastic polymer Water resistance: Splash proof FCC ID: INWY6 Bluetooth QD ID: B021137 Copyright © 2021 Polar Electro Oy, FI-90440 KEMPELE. All rights reserved.
