Product Manual

1. SECURELY SNUG ALL FASTNERS (DO NOT OVER TIGHTEN)
2. FOOT PEDAL SHOULD FREELY MOVE AFTER BEING SNUGGED
RE-USE HITCH BLADE
RE-USE SPRING
STEP-1
TOP VIEW
FINAL ASSEMBLY
CRADLE (104824) IN PLACE AND MARK
HOLE LOCATIONS. DRILL TWO 1/8” HOLES
AND THEN SCREW (104824) IN PLACE
WITH TWO (104829) AND TIGHTEN
SECURELY.
SOME UNITS MAY HAVE BEEN PRE-
DRILLED ALREADY.
STEP-2
BOTTOM VIEW