Installation Instructions

9/8/04
R.D. MW
710-0107 Panel Built Installation
Rev. 01
1
Accessories
Trim Profiles
Hardware Package
Finishing Nails
3” Screws
Torx Bit
Wood Joiners
2” Screws
1-1/2” Screws
Carriage Bolts
(for saunas with L-benches)
Washers & Nuts
Cove Molding
Inside 45 Deg. Corner Molding
(on rooms w/more than 4 walls)
Window/Door Casing
(normally pre-installed)
Outer 45 Deg. Corner Molding
(on rooms w/more than 4 walls)
Inside Corner Molding
Vent Valve
Duckboard
Bench
Electrical Access Board
Door Handle
Vent Grill
Headrest
Backrest
Note: Half of the groove has
been removed for easy
installation
Exterior Facia Trim
(in some models)