Specifications

27
26
Technical
Specifications
Polar Heart Rate Monitor is designed to indicate the level of
physiological strain and intensity in sports and exercise. No
other use is intended or implied. Heart rate is displayed as
number of heart beats per minute (bpm).
POLAR TRANSMITTER
Battery type: Built-in Lithium Cell
Battery life: Average 2500 hours of use
Operating temperature: 14
O
F to 122
O
F / -10
O
C to +50
O
C
POLAR WRIST RECEIVER
Battery type: CR 2032
Battery life: Average 1 year (2h/day, 7 days/week)
Operating temperature: 14
O
F to 122
O
F / -10
O
C to +50
O
C
Water resistancy: to 20 metres
Accuracy of heart
rate measurement: ±1% or ±1 beats per minute,
whichever larger, definition applies
to steady state conditions
DEFAULT SETTINGS
Upper Limit: 150
Lower Limit: 120
...HEART RATE READING BECOMES ERRATIC OR
EXTREMELY HIGH (OVER 200 BPM)?
You may have come within range of strong electromagnetic
signals which cause erratic readings on the Receiver display.
Check your surroundings and move further away from the
source of disturbance. Precautions.
...THE DISPLAY IS BLANK OR FADING?
Have the batteries checked. Service.
...THE BATTERY OF THE WRIST RECEIVER
MUST BE REPLACED?
We recommend having all service done by authorised Polar
Service. Especially during the warranty period this is
necessary to keep the warranty of the whole Polar Heart Rate
Monitor valid. Polar Service will test your Wrist Receiver for
water resistance after battery replacement and make a full
periodic check of the complete Polar Heart Rate Monitor.
Care and Maintenance/Batteries and Service.
FAVOR manual GBR/E 16/1/01, 13:0926-27