Manualshelf

Instructions / Assembly

ManualsBrandsPOJJO ManualsBathVanity Valet Boutique Plus Wall Mount Hair Tool Organizer in White
1234
POJJO Inc 18208 Preston Rd. #D9-136 Dallas, TX 75252 (T) 214.937.3511 / (F) 214.227.2017 www.pojjo.com POJJO copyright @2016
installation instructions
Collection: Vanity Valet Boutique Item Code: VVB
1. Carefully review instructions prior to assembly.
2. Required tools: Philips head screwdriver or drill.
• Save these instructions for future reference.
VVB-03
WARNING:
POWERSTRIP MUST BE PLUGGED INTO A GFCI (GROUND FAULT CIRCUIT INTERRUPTER) PLUG.
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY AND/OR DAMAGE TO THE UNIT.
.
SAFETY WARNING: STAINLESS STEEL TUBES AND CAP CAN BECOME VERY HOT DEPENDING ON
HOW LONG A HOT TUBE IS LEFT INSIDE. PARTICULAR CARE SHOULD BE TAKEN TO AVOID
TOUCHING HEATED METAL SURFACES.
1. Locate the wall you wish to use for mounting the Boutique (VVB).
®
2. Take the mounting template and tape it to the location for the VVB.
3. Determine if any of the 3 holes hit a stud.
a. If yes, do not use a drywall screw for that particular hole.
Instead, pre-drill and insert a wood screw for that location. Continue to step 4.
b. If no, continue to 4.
4. Use a pencil or tapper to pierce the paper and mark the three holes for the dry wall screws.
5. Remove template and add each anchor to identied screw hole:
a. Place #2 Phillips screwdriver into recess of the anchor.
b. Press into drywall while turning the anchor clockwise until
until it is sealed flush with the wall.
c. Place VVB in position, over installed anchor. Insert screw
with screwdriver. Tighten VVB in place.
d. Repeat this process for all 3 holes.
14 1/2”
ON
OFF
Item
No.
Description Material Qty.
Use with
ACHR-50 Zinc 3 3/4
#8 x 2”
Zinc 3
Stainless
Steel
Stainless
Steel
Stainless
Steel
1 3”
2”
2
1
1.5”
1
1
2”
Dowel and
1 1/4” screw
Mounts using
4 #6 1/2”
screws
Vanity Valet Boutique
Installation Template
* Use holes to mark wall
Included accessories
1Paper
Misc
PC
8.5”x11”
Anchor
Wall
TB00102
TB00101
TB00103
RL2512
PW0105
SCR8FH2
TMP010
Appliance holder
Appliance holder
Appliance holder
12”
7”
9 3/4”
18”
Patent www.pojjo.com/patents

Summary of content (4 pages)