User guide

ManualsBrandsPoison Spyder ManualsCarJK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50 LED

INSTALLATION INSTRUCTIONS

JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50” LED

Thank you for purchasing Poison Spyder

products for your Jeep. Installation is fairly simple

with the right tools and good mechanical abilities.

If you are not condent in your mechanical skills,

please seek the help of a professional to perform

the installation. Please read through these entire

instructions before proceeding with installation.

IMPORTANT: Completely install and remove

these items prior to painting or powder coating.

This will allow you to check for tment or do any

clearancing or tting ahead of time, to reduce

the chance of damage to the nish during nal

installation. Poison Spyder Customs Inc. is not

responsible for costs for or damage to paint or

powder coat nish under any circumstances,

including paint or powder coat of incorrectly

shipped or defective parts.

PARTS LIST

Please check your packages immediately upon

arrival to ensure that everything listed is included,

and to check for damage during shipping. If

anything is missing or damaged, call Poison

Spyder at (951) 849-5911 as soon as possible.

(1) Driver Side A-Pillar Light Bar Mount

(1) Passenger Side A-Pillar Light Bar Mount

(1) Driver Side A-Pillar Rubber Liner

(1) Passenger Side A-Pillar Rubber Liner

INSTALLATION NOTES

• Re-use the factory hardware at the lower

corners of the windshield brackets.

• This product is designed exclusively for

mounting the Rigid Industries 50” E-Series or

SR-Series LED light bars. No guarantee is

maderegardingtmentofotherbrandsoflight

bars.

• Routing of electrical cables is left to the

installer’s discretion. We have seen several

different methods of routing the cable, we

encourage you to do a search on the web for

ideas and tips for routing the cables.

• With the SR-Series (single row) light bar, If

the light bar produces an annoying whistle or

harmonics at highway speeds, try ipping it

over. We have had the best results with the

lightbarippedsothatthecablesroutedown

the driver’s side.

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50” LED PARTS LIST Please check your packages immediately upon arrival to ensure that everything listed is included, and to check for damage during shipping. If anything is missing or damaged, call Poison Spyder at (951) 849-5911 as soon as possible.
PAGE 2
WARRANTY Poison Spyder Customs™ warranties all of the products we sell and distribute for one (1) year from the date of sale. These products will be free from defects in material and workmanship under normal installation, and use. Due to the intended use the powder coat finish is warranted for ninety (90) days. The finish warranty will not cover a product if it has been damaged in any way. Warranty is limited to repair or replacement.