Owners manual

POISON SPYDER CUSTOMS INST-17-16-021_A • JK BFH™ II Front Bumpers 3

8. Attach the vacuum pump into the relocation

bracket, oriented as shown in the photo. Use the supplied

1/4-20 X 1-1/2 SS Button Head Cap Screws, SS lock nuts

and washers.

9. Loosen the two bolts that hold the sway bar bushing

block to the underside of the driver side frame rail.

10. Insert the mount ﬂange of the vacuum pump

relocation bracket between the swaybar bushing block

and the underside of the driver side frame rail. Reinstall

and re-tighten the two swaybar bushing blocks.

11. Loosen the two bolts that hold the sway bar bushing

block to the underside of the passenger side frame rail,

and insert the swaybar spacer in between the swaybar

bushing block and the frame rail.

12. Reinstall and re-tighten the two swaybar bushing

blocks.

13. Re-attach the two vacuum hoses to the canister.

Re-attach the electrical pigtail to the wiring harness. Use

zip-ties to secure any loose hoses or wiring.