Owners manual
INSTALLATION INSTRUCTIONS
©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
LJ RICOCHET ROCKERS &
ROCKER KNOCKERS INSTALLATION
Thank you for purchasing Poison Spyder Rocker
Knockers (shown above) or Ricochet Rockers
for your Jeep LJ Unlimited. You now own the
ultimate in rocker panel protection for your Jeep.
If you purchased Rocker Knockers with the
Slider option, these have already been welded
to the Rocker Knockers and install in the same
manner, as do the Ricochet Rockers. Installation
is fairly simple with the right tools and good
mechanical abilities. If you are not condent in
your mechanical skills, please seek the help of a
professional to perform the installation. Please
read through these entire instructions before
proceeding with installation.
PARTS LIST
(1) Driver side Rocker Knocker
(1) Passenger side Rocker Knocker
(10) 3/8-16X1SSatheadcapscrew
(10) 3/8atwasher
(10) 3/8-16nyloninsertlocknut
TOOLS NEEdEd
• 9/16”socketorendwrench
• 5/8”socket
• 6”socketextension
• Ratchet
• 7/32”hexkeyorhexsocket
• Auto-punchorcenterpunchandhammer
• Drillmotor
• 3/16”drillbit
• 3/8”drillbit
• Rat-tailleorburrknife
• Torquewrench
• Touch-uppaintorclearcoat
• Floorjackandextension
BEfORE YOu BEgIN
• Paint or powdercoat both the inside and
outsideoftheRockerKnockers.Ifpainting
themyourself,takethetimetodoathorough
job cleaning the Rockers and making sure
they are completely free of dirt, grease or
oils,solventsorcleanerresidue.Sandingor
scufngthesurfacewillalsohelptheprimer
andpaint to adhere. Usea quality etching
primer,thenpaintinyourcolorofchoice.
• ParktheJeeponaat,levelsurfaceandset
theemergencybrake.
• Besurethatthesidesandundercarriageof
thevehicle,intheareasyouwillbeworking,
arecleanandclearofdebrisandmud.
• Remove any fender lares or rocker panel
covers or moldings that will interfere with
the Rocker Knocker or Ricochet Rocker
installation.