Owners manual

POISON SPYDER CUSTOMS INST-14-16-020_A • TJ-YJ-CJ BFH™ Front Bumpers 2

grille) onto the crossmember underneath. Pull the bumper

off and drill the two marks with a 1/2” drill. Later, when

installing the winch, the two rearward bolts will sandwich

the bumper between the crossmember and the winch. If

not installing a winch, use two 3/8-16 X 1 Gr8 Hex Head

Cap Screws with ﬂat washers and lock nuts (not provided)

to secure the bumper to the crossmember at these two

locations.

5. Use the original hardware to bolt the bumper to the

frame rails. Torque to OE speciﬁcations.

6. If installing a winch with Poison Spyder Winch

Fairlead Mount, follow the instructions included with the

Winch Fairlead Mount.

Congratulations, you have installed your Poison

Spyder Customs RockBrawler BFH front bumper!