Owners manual

POISON SPYDER CUSTOMS INST-14-02-052_A • DeFender™ Full Length Side Plates 3

the nut-sert or the sheetmetal. Then grind the tack(s)

smooth and apply touch-up paint to prevent rust.

10. Re-install the Side Plate, this time using all of the

remaining hardware. Use anti-seize compound on each

screw, especially those installed into the nut-serts. Be very

careful not to over-tighten the screws into the nut-serts, as

they may spin if not installed properly. See the Nut-Sert

Install Tool Instructions for tips on using dealing with a

“spinning” nut-sert.

11. Repeat for the other side.

Congratulations, you have completed the installation

of your DeFender™ Full Length Side Plates!