Owners manual
©2016 POISON SPYDER CUSTOMS 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUCTIONS INST-14-66-010_A
TJ - YJ TrailGate™
IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation. If you are not
confident in your mechanical skills, please seek the help of a professional to perform the installation. Check your packages immediately upon arrival to ensure that
everything listed is included, and to check for damage during shipping. If anything is missing or damaged, or if you need technical assistance with any aspect of
this installation, call Poison Spyder at (951) 849-5911 as soon as possible. This document last updated January 2016.
APPLICATIONS
These installation instructions apply to the following
Poison Spyder products:
14-66-010 TJ TrailGate™
13-66-010 YJ TrailGate™
PARTS LIST
Please check your packages immediately upon arrival
to ensure that everything listed is included, and to
check for damage during shipping. If anything is
missing or damaged, call Poison Spyder at (951) 849-
5911 as soon as possible.
(1) TrailGate™ Gate Panel
(1) TrailGate™ Tramp Stamp™
(1) Latch Cover Left
(1) Latch Cover Right
(2) Tub-Side Cable Bracket
(2) Gate-Side Cable Bracket
(2) Limit cable
(2) Hinge
(2) Lock-latch assembly
(1) 5/8” X 2.67 ft. Adhesive Back foam Rubber Bulb Seal
(2) Trail Gate Hinge Spacer
(1) TJ TrailGate™ Hardware Kit
PN: 14-66-010 includes:
(2) 5/16-18 X 1 SS Button Head Cap Screw
(2) 5/16-18 Nut-Sert
(1) 5/16” Nut-Sert Install Tool - includes:
(1) 5/16-18 X 2 Gr5 Hex Head Cap Screw
(2) 5/16” SAE Hardened Flat Washer
(1) 3/8-16 X 1-1/8 Coupling Nut
(1) 5/16-18 Nut-Sert
(12) 1/4-20 X 3/4 SS Button Head Cap Screw
(8) 1/4-20 Nut-Sert
(1) 1/4” Nut-Sert Install Tool - includes:
(1) 1/4-20 X 2 Gr8 Hex Head Cap Screw
(2) 1/4” SAE Hardened Flat Washer
(1) 3/8-16 X 1-1/8 Coupling Nut
(1) 1/4-20 Nut-Sert
(4) 1/4-20 Nylon Insert Lock Nut
(4) 1/4” SAE Hardened Flat Washer
(12) #10-24 X 1 SS Button Head Cap Screw
(12) #10-24 SS Nylon Insert Lock Nut
(12) #10 SS Flat Washer
(2) M5-0.8 X 50mm Hex Head Cap Screw
(2) M5-0.8 Jam Nut
TOOLS NEEDED
• Fine-tip felt marker & measuring tape
• Mechanic’s tool set including an assortment of hex keys,
end wrenches, sockets and ratchet
• Drill motor with 1/4, 5/16, 25/64, 17/32 and 1/2 drill
bits
• Grinder or cut-off wheel
• Thread anti-seize compound
• Touch-up paint
• Optional: Professional nut-sert install tool
NOTE: The Nut-sert installation tool provided is simple
and inexpensive. It works but it can be tedious to
use, especially when installing a large number of nut-
serts. We highly recommend purchasing, renting, or
borrowing a Professional Nut-Sert Installation Tool.
These are available from various online tool dealers,
or through Poison Spyder (PN: 70-TS-325-RN)
IMPORTANT: Completely install and remove the
TrailGate™ prior to painting or powder coating it. This
will allow you to check for tment or do any clearancing
or tting ahead of time, to reduce the chance of