Owners manual

©2016 POISON SPYDER CUSTOMS 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUCTIONS INST-14-08-050_A
Rocker Knockers™ &
Ricochet Rockers™
for TJ-YJ-CJ
IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation. If you are not
confident in your mechanical skills, please seek the help of a professional to perform the installation. Check your packages immediately upon arrival to ensure that
everything listed is included, and to check for damage during shipping. If anything is missing or damaged, or if you need technical assistance with any aspect of
this installation, call Poison Spyder at (951) 849-5911 as soon as possible. This document last updated September 2016.
APPLICATIONS
These installation instructions apply to the following
Poison Spyder products:
10-08-010 CJ-5 Rocker Knockers
10-08-020 CJ-5 Rocker Knockers with Sliders
11-08-010 CJ-7 Rocker Knockers
11-08-020 CJ-7 Rocker Knockers with Sliders
11-50-010 CJ-7 Ricochet Rockers
12-08-010 CJ-8 Rocker Knockers
12-08-020 CJ-8 Rocker Knockers with Slider
12-50-010 CJ-8 Ricochet Rockers
13-08-010 YJ Rocker Knockers - Stock Wheel Opening
13-08-020 YJ Rocker Knockers with Slider - Stock Wheel Opening
13-08-040 YJ/CJ-7 Rocker Knockers - TJ Wheel Opening
13-08-050 YJ/CJ-7 Rocker Knockers with Sliders - TJ W.O.
13-50-010 YJ Ricochet Rockers - Stock Wheel Opening
13-50-050 YJ/CJ-7 Ricochet Rockers - TJ Wheel Opening
14-08-060 TJ Rocker Knockers with Sliders
14-08-310 TJ Rubber Rocker Liners
14-50-050 TJ Ricochet Rockers
PARTS LIST
(1) Driver side Rocker Knocker
(1) Passenger side Rocker Knocker
(x) 3/8-16X1SSatheadcapscrew*
(x) 3/8atwasher*
(x) 3/8-16nyloninsertlocknut*
*Quanitiy “x” varies by Jeep model:
(10) TJ
(12) CJ-5 & YJ
(14) CJ-7
TOOLS NEEDED
9/16”socketorendwrench
5/8”socket
6”socketextension
Ratchet
7/32”hexkeyorhexsocket
Auto-punchorcenterpunchandhammer
Drillmotor
3/8”drillbit
Torquewrench
Touch-uppaintorclearcoat
Floorjackandextension
BEFORE YOU BEGIN
Paint or powdercoat both the inside and outside
oftheRockerKnockers.Ifpaintingthemyourself,
take the time to do a thorough job cleaning the
Rockersandmakingsuretheyarecompletelyfree
ofdirt,greaseoroils,solventsorcleanerresidue.
Sandingorscufngthesurfacewillalsohelpthe
primerandpainttoadhere.Useaqualityetching
primer,thenpaintinyourcolorofchoice.
ParktheJeeponaat,levelsurfaceandsetthe
emergencybrake.
Be sure that the sides and undercarriage of the
vehicle,intheareasyouwillbeworking,areclean
andclearofdebrisandmud.
Remove any plastic ares that are bolted to the
sideof thebody(someTJ’sandYJ’s).Remove
any existing rocker panel molding (some CJ’s),
or any existing OEM rocker panel covers (all
RubiconsandSaharas).

Summary of content (2 pages)