User's Manual

When you have established a network connection (whether via Wireless LAN, Bluetooth, or

activeSync), you can access the Internet and download additional software programs.

When selecting programs, verify that the program and version of the program are designed for

Windows Embedded Pointmobile 6.5 Pro and the terminal’s processor. You can verify your

processor by tapping Start -> Settings -> Control Panel -> System -> General tab. Make a

note of the information in the Processor field.

1. Open Internet Explorer and navigate to the program’s location. You may see a single *.exe or

setup.exe file, or several versions of files for different device types and processors.

2. Select the program version that matches your Handy Terminal and processor.

3. Read any installation instructions, Read Me files, or documentation that comes with the program.

Many programs provide special installation instructions.

4. Download the program to the terminal directly from the Internet.

You would normally store the program in the

Program Files folder unless another location is

required by the program.

5. On the terminal, the installer file; e.g., the *.exe file.

6. The installation wizard for the program begins.

7. Follow the directions on the screen to complete installation.

11. Bluetooth Handler

Bluetooth wireless technology is a short-range communications technology to connect portable

and/or fixed devices while maintaining high levels of security.

11.1.

Enabling the Bluetooth Radio

1. Select the device panel indicated by the UP arrow in the lower, right portion of the display.

2. Tap Turn Bluetooth On.

The Bluetooth icon appears in the task bar.

☞

NOTE:

In order to avoid wasting energy, the Bluetooth, module is off by default. If you need to have Bluetooth

working, the module must be powered on using the Wireless Communications applet.

☞

NOTE:

Suspending the terminal powers off the Bluetooth radio and drops the Bluetooth connection. When the

terminal resumes, it takes approximately 10 seconds for the Bluetooth radio driver to re-initialize the radio.

☞

NOTE:

Area coverage and Bluetooth radio performance may vary, due to environmental conditions or interference

caused by other devices (microwave ovens, radio transmitters, etc.).

11.2.

Connecting to Other Devices

Before connecting to another device, make sure that the Bluetooth connection on the other device is

enabled.

1. Tap on the Bluetooth icon in the task bar.

The Bluetooth Handler appears on the screen.

2. Add New Device

The available services of all devices / profiles in range display in the Bluetooth Handler.