User's Manual

Length

Set the minimum and maximum

lengths from the pull-down lists.

If the numbers are the same,

acceptable bar codes will only

be that length. Not all types will

have this option enabled.

Redundancy(N4313

device only)

If you are encountering errors

when reading some bar codes,

you may want to adjust the

redundancy count. Redundancy

adjusts the number of times a

bar code is decoded before

transmission, which may reduce

the number of errors. Note that

the higher the redundancy

count, the longer it will take to

decode the bar code

About

Specifies Barcode engine type, Firmware revision, Decider revision, API revision

Load Factory Default

After modifying the current

settings, if you wish to return to

the factory defaults, tap the

Load Factory Default button.

10. Communication

10.1.

Communication Options

Handy Terminal offers several communication options including Microsoft ActiveSync and wireless

radios.

USB Connector

The MicroUSB connector on bottom side supports USB 2.0 High speed

HandyLink Connector (Wired Communication)

The mechanical connector on the bottom panel connects the terminal to various Handy

Terminal communication peripherals that connect to a host workstation via USB (1.1 or

higher), thus enabling ActiveSync communication.

For more information, see ActiveSync Communication on paragraph 10.4.

Wireless Radios (Wireless Communication)

HANDY TERMINALs can be equipped with an 802.11b/g/n Bluetooth radio and WWAN.

For more information, see Wireless Radios on paragraph 10.14.

10.2.

Installing Additional Software

Handy Terminal is shipped with the operating system, radio drivers, and custom software (CICO)

already installed. These are the default programs that install when your terminal first boots up. You