User's Manual

30
main battery might be too low to resume operation. To check, remove the battery and install a fully
charged battery or connect the terminal to a Handy Terminal charging peripheral.
4.23. Memory Allocation
You can verify file storage and program memory in System Properties.
1. Tap Start -> Settings -> System -> Memory tab.
4.24. Care and Cleaning of the Products
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-
free cloth. The terminal can be cleaned with a damp cloth.
4.25. PM60 Technical Specifications
Model PM60
Operating System Microsoft Windows Embedded Pointmobile 6.5 Pro
Application Software Tools and Demos
Processor Cortex-A8 1GHz
Memory 512MB RAM X 1GB Flash
Storage Expansion User accessible Micro SD memory card slot.
Display 3.5 in. transmissive active matrix 65K color LCD with backlight, VGA (480 x 640)
Scan Engine
1D engine: N4313, uE966
2D engine : N560x
Keypad Numeric , Qwerty
Audio Built-in microphone and speaker
I/O High speed USB 2.0 from cradle (or I/O cable)
Battery Li-ion battery 3.7V / 4000 mAh / 14.8 Wh
Expected Hours of
Operation
8.5+ hours (with scan and continuously transmitting if using new standard Li-ion
battery)
Charging 5V input through MicroUSB port.
Expected Charge Time Capacity: 4000mAh – approx. 5 hours
Charging Peripherals
MicroUSB Adaptor
Single Slot cradle–single-bay terminal charge/communicate
Single Ethernet cradle–single-bay terminal charge/communication base
(Via Ethernet connection)
Quad Battery Charger