User's Manual

30
Ethernet port.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
4.15. Li-ion Battery Packs
The Li-ion battery pack provides the main power supply for the terminal.
4.16. Battery Power
The intelligent battery technology inside the terminal features of battery power:
• The battery pack
The battery works to prevent data loss when the terminal is used over long periods of time.
The battery must be charged to full capacity before using the AC Adaptor for the first
time!
Charge the main battery pack with the AC Adaptor for a minimum of 6 or 8 hours depending
on your battery before initial use.
4.17. Main Battery Pack
There are two Li-ion battery packs available for the HANDY TERMINAL:
Standard Capacity: Li-ion 3.7V/3120mAh/14.8Wh
The Li-ion battery pack is the primary power source for the Handy Terminal as well as for the
internal backup battery.
Extended Capacity: Li-ion 3.7V/5200mAh/19.2Wh
The Li-ion battery pack is the primary power source for the Handy Terminal as well as for the
internal backup battery.
Changing the Main Battery Pack
Before installing a battery pack, press the Power key to put the terminal in Suspend Mode so that
operations are suspended before removing the main power source. Always put the terminal in
Suspend Mode prior to changing the battery. The HANDY TERMINAL is shipped with the battery
separate from the unit. You will need to loosen the Lanyard, remove the battery door, insert the
battery, and replace the battery door.
☞NOTE: The battery door must be installed prior to booting the unit.