User Manual

45
☞NOTE: To save battery life it is recommended to set idle time as short as possible.
9.8. Alerts Tab
Adjust the level of main battery for Low battery message and Critical battery message.
By default, 20% is set for Low battery message and 10% is set for Critical battery message
9.9. Wakeup Source Tab
Enable Wake(Resume) resources from suspend(Sleep) mode
By default, all available resources are enabled.
9.10. Program Button properties
9.11. Program Buttons Tab
1. Select
Start > Settings > Control Panel > Program buttons
2. Chose its type:
· Default – button will be assigned default function.
· No function – button does not have any functions.
· Scan key – button is used as Scan key.
· Application – click on Open button and select
application to bind with this key.
4. To exit, press OK from the command bar, or press the
< ENT > key on the keypad
9.12. Up/Down Control
Customize the way the Up/Down control repeats