User Manual

31
2. When the reset is complete, the Desktop appears.
Hard Reset (Cold Boot)
CAUTION: A hard reset erases all of the data and applications stored in RAM memory, reloads the
OS, and launches Autoinstall, which installs any CAB or REG files in the \AutoInstall\Cabfile.
Hard resets automatically launch a soft reset as part of the boot process if there are CAB files
present.
1. Press the Power button for 3 seconds and choose the Hard Reset on the power menu The screen turns
black and the decode and scan LED flashes red.
2. The terminal re-initializes, which re-installs all programs stored in the \Autoinstall\Cabfile folder.
4.21. Suspend Mode
Suspend Mode suspends terminal operation. The terminal appears to be “off” when in Suspend
Mode. The terminal is programmed to go into Suspend Mode automatically when inactive for a
specified period of time. You can set this time period in the Power setting.
To suspend and resume operation, press the Power button. You may also press the front Scan key
to wake a suspended device unless the battery door has been removed and replaced.
☞NOTE: You should always put the terminal in Suspend Mode when you change the battery pack; see Changing the
Battery Pack on paragraph 4.18.
Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button, the main battery might be too low
to resume operation. To check, remove the battery and install a fully charged battery or connect the
terminal to a Handy Terminal charging peripheral.
4.22. Memory Allocation
You can verify file storage and program memory in System Properties.
1. Tap Start -> Settings -> System -> Memory tab.
4.23. Care and Cleaning of the Products
When needed, clean the image engine window and the LCD display
with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned
with a damp cloth.
4.24. PM40 Technical Specifications
Model
PM40
Operating System
Microsoft Windows Embedded Handheld 6.5 Pro
Application Software
Tools and Demos
Processor
Cortex-A8 1GHz