User Manual

30
Charging Time
The standard capacity 1800mAh Li-ion battery pack requires five hours to charge to full capacity,
while the high capacity 3600mAh pack requires eight hours.
4.19. Managing Main Battery Power
Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a
continuous power supply to the terminal to help prevent data loss. When you remove a battery pack,
insert another charged battery pack in the Handy Terminal. If the main battery pack is low, insert
the terminal into a charging peripheral to power the terminal and begin recharging the battery.
☞NOTE: If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake
the HANDY TERMINAL; you must replace the discharged battery with a fully charged battery or apply AC power to
the terminal.
Checking Battery Power
Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge
status of the main battery
☞NOTE: You can also check battery power by tapping Start -> Settings -> System -> Power.
4.20. Resetting the Terminal
Soft Reset: Press the Power button for 3 seconds and choose the soft Reset on the power menu.
Hard Reset: Press the Power button for 3 seconds, choose the Hard Reset.
Soft Reset (Warm Boot)
A soft reset re-boots the terminal without losing RAM data, terminates all running applications,
reloads the OS, and launches Autoinstall, which re-initializes any CAB or REG files in
\AutoInstall\Cabfile folder.
You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software
applications that require a reboot, or 3) after making changes to certain system settings, or 4) to
install new CAB or REG files.
1. Press the Power button for 3 seconds and choose the Hard Reset on the power menu . The screen turns
black and the decode and scan LED flashes blue.