User Manual

4.17. Battery Power
The intelligent battery technology inside the terminal features of battery power:
• The battery pack
The battery works to prevent data loss when the terminal is used over long periods of time.
The battery must be charged to full capacity before using the HANDY TERMINAL for the
first time!
Charge the main battery pack with the Handy Terminal charging cable for
hours depending on your battery before initial use.
4.18. Main Battery Pack
There are two Li-ion battery packs available for the HANDY TERMINAL:
Standard Capacity: Li-ion 3.8V/1800
High Capacity: Li-ion 3.8V/3600mAh/
The Li-ion battery pack is the primary power source for the Handy Terminal as well as for the
internal backup battery.
Changing the Main Battery Pack
Before installing a battery pack, press the Power key to put the terminal in Suspend Mode so that
operations are suspended before removing the main power source. Always put the terminal in
Suspend Mode prior to changing the battery. The HANDY TERMINAL is shipped with the battery
separate from the unit. You will need to loosen the
battery, and replace the battery door.
☞NOTE: The battery door must be installed prior to booting the unit.
Charging Options
When the battery is installed in the terminal, you can use any of the peripherals listed below to
charge the battery.
• AC Power Supply to USB Port direct.
• Single slot docking cradle/Single slot
• Insert the battery in the spare battery charging well in the back of either the Handy Terminal
cradle or Handy Terminal Ethernet cradle.
2
29
The intelligent battery technology inside the terminal features of battery power:
to prevent data loss when the terminal is used over long periods of time.
must be charged to full capacity before using the HANDY TERMINAL for the
Charge the main battery pack with the Handy Terminal charging cable for a minimum of
hours depending on your battery before initial use.
Main Battery Pack
ion battery packs available for the HANDY TERMINAL:
1800mAh/6.8Wh
mAh/13.6Wh
ion battery pack is the primary power source for the Handy Terminal as well as for the
Changing the Main Battery Pack
Before installing a battery pack, press the Power key to put the terminal in Suspend Mode so that
operations are suspended before removing the main power source. Always put the terminal in
Suspend Mode prior to changing the battery. The HANDY TERMINAL is shipped with the battery
separate from the unit. You will need to loosen the Lanyard, remove the battery door, insert the
battery, and replace the battery door.
must be installed prior to booting the unit.
When the battery is installed in the terminal, you can use any of the peripherals listed below to
direct.
Single slot Ethernet cradle
nsert the battery in the spare battery charging well in the back of either the Handy Terminal
cradle or Handy Terminal Ethernet cradle.
1
Main battery pack
The intelligent battery technology inside the terminal features of battery power:
to prevent data loss when the terminal is used over long periods of time.
must be charged to full capacity before using the HANDY TERMINAL for the
a minimum of 5 or 10
ion battery pack is the primary power source for the Handy Terminal as well as for the
Before installing a battery pack, press the Power key to put the terminal in Suspend Mode so that
operations are suspended before removing the main power source. Always put the terminal in
Suspend Mode prior to changing the battery. The HANDY TERMINAL is shipped with the battery
, remove the battery door, insert the
When the battery is installed in the terminal, you can use any of the peripherals listed below to
nsert the battery in the spare battery charging well in the back of either the Handy Terminal slot
3
4