User Manual

12
☞NOTE: Two points of Battery guide stopper must be pertinently inserted to rear cover battery guide stopper hole
☞NOTE: The battery door must be installed prior to booting the unit.
WARNING: Use only Pointmobile-approved Li-Ion battery packs. Unauthorized battery may result in damage not
covered by the warranty.
3.2. Charge the Batteries
Handy Terminals ship with only main battery pack significantly charged of power. Charge the main
battery pack with the Handy Terminal charging cable for a minimum of 4 or 6 hours depending
on your battery before initial use.
1. Attach the appropriate plug adapter to the plug of the power cable.
2. Insert the plug into the appropriate power source.
Plug the Handy Terminal power cable into the USB Jack on the side end of the unit.
WARNING: Use only Pointmobile-approved peripherals, power cables, and power adapters. Unauthorized
peripherals, cables, or power adapters may cause batteries to explode or damage your device.
DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting
to an external power source.
Batteries must be charged at a temperature ranging from 0~45℃ (±3℃). If you don’t follow the guide, it might
have a harmful effect on the battery life.
CAUTION: After the battery has been charged, disconnect the DC Power Jack from the terminal. If you stay on
that plug in use, it is possible to break the power code.
☞NOTE: Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge
them.
☞NOTE: If you remove the battery pack or it completely discharges, you have 30 minute window of time to insert a
charged battery pack before the battery completely discharges.
3.3. LED Indicators
The red LED is ON while charging the battery and the green LED is ON when the battery is fully
charged.